My Second Quilt

 

Somewhere over the .... or Rainbow Strip 'n Flip

Today I'm showing you the second (well, the second one I finished, but the first one I started) quilt I've ever made. It is made with the same jelly rolls I used for my first quilt. I saw Cluck Cluck Sew's easy tutorial on the Strip and Flip top and decided that this was perfect for a first quilt!

And this is how it turned out:

Rainbow Strip 'n Flip Quilt

The Piecing

The piecing should have been quite easy. I mean, it's just strips, right? Yeah, "just" strips...

I ended up with bowed strips. I can't really say in hindsight why that is, just pick one of the following no-nos (which - of course - I all committed):

1. It might well be that the strips I worked with were already cut with an elbow in them.

2. I ironed - a lot, with steam and vigariously!

3. I did sew them in pairs, groups of 4, etc. but always from the same side.

4. My quarter inch seam was non-existent. (To my defense: I didn't have a quarter inch presser foot at the time. I'm also used to the metric system, so it was difficult to just eyeball it. I've gotten better with practice since, so go me!)


For the back I used up the absolutely last scraps I had left over from both this quilt and my First Rainbow quilt. Needless to say, some of those scraps were a bit uneven or too small, but I worked them into a half-decent strip to add some colour to the back.

Rainbow Strip 'n Flip Back



The Quilting

I again quilted with black thread, only realising half-way through that it would be quite noticable on the colourful batiks! Oopsy?
However, I think that was actually a lucky strike: These straight lines actually balanced out the bowing of the strips so that it is hardly noticable in the finished quilt!

Straight line quilting

To change it up a little, I quilted the "flipped" part diagonally and quilted straight lines on all for sides the border so that I ended up with four little checkerboards in the corners.

I tried to machine bind the whole binding, but after sewing down about one third of one side, I decided to rip it all out and do it by hand, because - well, let's just say it wasn't pretty!

Rainbow Strip 'n Flip in all its glory

Overall, I can say that I'm pretty happy how my first lap sized quilt turned out!

All the best,
Cat


My First Quilt

I decided to show you the quilts I've made so far. I only started quilting this January, so there are not that many to share yet (but I have a little booklet where I collect quilting ideas, I'm at a whopping 20 new design ideas!).

 

The Fabric

I picked up two batik jelly rolls in Walmart when I was in New Orleans last Christmas. I actually wanted to go to Michael's or JoAnn's. However, they were a bit too far out and not really reachable with public transport so I had to make due with Walmart's. It certainly wasn't the best quality quilting cotton, but I figured it was good enough to start with. Who wants to spend a fortune when you don't even know it'll turn out ok? Besides I'd already spent a lot on a cutting mat, a rotary cutter and a couple rulers.

 

And this is what I came up with for my first ever finished quilt:

 

"First Rainbow"

I called it "First Rainbow". It's about 36"x36".

The Piecing

It wasn't actually the first quilt top I pieced, I made a Strip 'n Flip top first, but then realised that it was rather big, so I decided to make a smaller baby quilt with the leftover fabrics. I wasn't sure if I'd be able to wrangle such a big quilt through my machine for all the quilting and wanted to have a smaller practise piece. Turns out it worked just fine!

I used one strip of each colour and added a thinner black strip, then cut them into three pieces, so that it would end up in a square. If you look closely, you realise the blocks are not exactly square. I didn't use a 1/4" foot at the time, but my normal presser foot and anyway, I was very knew to the whole inch concept. I am happy to report that I've gotten better - both with the 1/4" seam and the calculations with inches!


In the making - late at night


When joining the blocks I ran into another problem: on some sides I had additional black strips, on others there was none...It took some re-arranging and thinking, but in the end I only had to rip two seams. The Quilting Police would probably have stuck me into Quilting Camp for 5 years, no probation. Luckily, I escaped that fate!

The Quilting

I used plain black fabric as backing and a fleece throw from Ikea for batting. Batting is quiet expensive around here (even when ordering in the US online, the shipping costs always floor me). That's why it turned out rather thick and should probably be called a play mat.

I bought specially waxed quilting thread (66% poly, 33% cotton) for the quilting and it worked fine. It is mostly quilted in the ditch - or I should say in, next to, over and in the vicinity of the ditch. :D

The border is quilted rather heavily and I used my foot as guidance. As you can see (don't look that closely, leave me some dignity here, please!) they are not that regular and there were a few puckers, too. Oh well, who cares? Non-quilters won't look that closely anyway! Right? Right?!


 

Detail of the quilted border

Adding the binding was the only frustrating part for me. First, I mucked up the joining of the two strips (they were twisted) and of course, I had already cut off the ends. So after trying and re-trying, the only thing that I could to was cut off the ends and join them in a straight seam. I also blame this unfortunate event - I secretly call it The Big Binding Bind of 2014 - for now being very obsessive when joining binding strips. I at least check 10 times before cutting anything off.

I tried to sew on the binding by machine, but after doing one side I realised that there wasn't a snowball's chance in hell that it would look good. So I ripped it all and hand sewed it. It sure took more time, but the result isn't bad at all!


As of now, this little quilt is still waiting for a new owner. I hope some family member or friend will get pregnant soon! :D


All the best,
Cat