Scales Cushion Tutorial Part 2

This is the second (and last!) part of the Scales Tutorial. The first part can be found here. Also, have a look at all my Black and White Cushions and the corresponding tutorials!

Still Sewing

Last time, we left off at this stage:

The blocks from Tutorial 1

You've measured them and made sure that they're all about the same size, ideally 11.5". Now divide that measurement by two (5.75") and cut the block into four equal squares. Make sure that the black middle square is about 1" big in all four pieces. Cut the other five blocks as well.


Block cut in 4

Now it's time to add the 1" black sashing strips. Put one of the strips under the pressing foot of your sewing machine, then add one of the small squares underneath this strip. Make sure that the black middle square is to the bottom right. Repeat this for 18 of the blocks, leaving 6 without a sashing strip. Then sew these blocks together, keeping them all in the same direction:

Sashing added between Blocks

You'll need two strips of 6 blocks, two of 4 and two of 2 blocks. Make sure the blocks without the sashing strip are at the end of the strip.

Finished strip sizes, two of each

Now you arrange them (counting the blocks in a strip) 2-4-6-6-4-2 on point. Add sashing between the different strips on the longer side of the two joining strips (blue arrows). On one of the middle strips with 6 blocks you'll have to add a sashing strip on both sides (green arrow).

Where to Add Sashing between the Strips

 

First, sew them together in pairs, then sew the different pairs to one whole piece. You can make sure that the sashing strips align perfectly by marking the connecting points and pinning the two sides together.

Press the seams towards the light, so that the sashing strip lies flat on the back.

Pieced Top Finished

Now all you have to do is cut the piece to size (20"x20"). I started off by cutting down the left side of the piece (blue line) and then the top (green). Then I measured 20" on the two remaining sides.

Measure at least twice before you cut and make sure you have nice 90° angles. If you misscut, you might have to start from the beginning again! (No pressure! *lol*)

Cutting Down to Size

And this is how the 20"x20" piece looks like:

Cushion Top Finished

Now you can add a batting of your choice and "quilt it as desired". I kept it simple and just SITD along both sides of the sashing to attach it to the batting.

For the back of the cushion cut two pieces the  20"x26". Press them in half (20"x13") and topstitch along the folded line about 1/4" in. Lie the two pieces on top of the quilted Scales piece, so that they overlap in the middle. Stitch along the the outside (also with a 1/4" seam allowance). You might want to go back over and secure the corners and especially the overlap of the two back pieces, as these are the stress points.

Adding the Back of the Case

Turn it inside out and put a cushion in it and voilà, here is your finished pillow:

Finished Scales Cushion

Have fun recreating the same or similar pillow cover! And make sure to share it with me!


All the best,
Cat.

Falling Waves From Hell

Today I'll tell you about the...(let me count) third quilt I made.

Let's just say: This one wasn't pretty! I basically hated every single step of the process!

Here's a first glimps of the culprit:

Falling Waves Quilt

 Looks innocent enough, doesn't it? If only it were so...

The Fabric

I found different fabrics in the sales bin at my local quilt shop. They were being sold for $5/m - which is a great deal in an area where fabric is sold for $24/m! I bought three fabrics in shades of pink because I thought they would work together nicely. Definitely not my favourite colour scheme, but it was - comparably - cheap!

The Piecing

This quilt was actually all about practice! I planned (and still plan) to make a quilt with HRTs (Half Rectangle Triangles), but they are not that easy to make without loosing all the points. So I decided to pratcise with HSTs (Half Square Triangles).

I used - what could possibly be described as - the traditional way of making HSTs: put two squares on top of each other, sew down the diagonal twice 1/4" from the middle.

I didn't calculate that every two squares sewn together that way would also yield two HSTs and I ended up with far too many! I was planning on a baby quilt, but now it's closer to the size of a lap quilt!

You can imagine that it took me a long, long time to sew them together, press them (half to the dark, the other half to the white) and square them up! I think I went through a whole audiobook. That's over 30 hours!

I was already fed up just looking at them!

Falling Waves in all its Hellish Glory

Then came the sewing them all together part. I hadn't met the 1/4" seam (or just a consistent near 1/4" seam) yet. Need I say more? Nope, it's blatantly clear I did a lot of ripping, re-sewing, re-ripping and re-sewing of these stupid pink fabrics I didn't like to begin with, sprinkled with imaginative swearing, groaning and foot stomping.

That's also when I learned: There's a moment when you just have to let that idea of all perfect points go and move on! And move on I did - quiet happily I might add!

 

The Backing

Having many leftover HSTs I decided to incorporate same of them in the backing. I decided to go with a strip with an easy heart design. The design and making of the back was probably the most fun part for me. No major hiccoughs either!

Back of the Falling Waves Quilt

The Quilting

Oi vey!

I started off with simple stitch in the ditch - or in my case to the left or the right, over and through the ditch! But it looked a little unfinished so I decided to add a few more lines. Naturally, I didn't really manage to space them evenly. Oh, well, who said it was planned that way anyway?! :P

The Quilting on the Falling Waves Quilt

Of course the whole quilting process didn't go smoothly. Somehow the spare backing and batting got caught in the quilting not once, not twice, but seven times!

More swearing, groaning and foot stomping ensued.

And out came my much used and dearly hated seam ripper!

I don't know why, it never happened before this quilt and never ever after this one (touch wood!).

Let's just say I'm very happy I got this quilt finished (big woohoo!) and bound and stored away!


I still have quiet a few pink HSTs left over in a baggy somewhere. I might pull myself together some time and make a few pillows are mini quilts out of them. Maybe when I'm finally gifting that quilt to someone...



All the best,
Cat.

Scales Cushion Tutorial Part 1

Hi there!

Today I'm showing you how I made the Scales cushion case. Here you'll find links to the other tutorials for the cushions.

Fabrics Needed

As with all the cushions in this series, the fabrics you need are black and white. Of course you can use other solids as well, even small prints might work for you.

Cutting...

Cut the following pieces (from top to bottom):

Fabrics needed for Scales Cushion

(6) 2.5" squares in black
(3) 1.25" strips in white
(4) 1" strips in black
(5) 2" strips in white
(6) 1.5" strips in black
(6) 1.25" strips in white
plus (8) 1" strips in black for sashing (not in the picture)

I calculated these measurements for normal 42"-44" wide fabrics, as I worked with wide fabrics when I made this cushion.

...and Sewing

First, take one of the white 1.25" strips and put it under your presser foot. Then take one of the black 2.5" squares and lay it right sides together on the bottom of the strip (as you are working with solids, there basically is no right side). Now you can sew the two pieces together and when you get to the end of the black square, just add the next one with a little gap between them, as is shown here:

"Chain"-piecing the squares

Once you've chain-pieced all six squares, cut them off the strip between the little gap, turn them around and add a white strip on the opposite side as well. Make sure you place them the right sides together underneath the strip! Again sew the strip to all six squares, then cut them loose. Press the strip with the seams outwards and cut back the white strips on the edge if necessary. It doesn't matter if you use scissors or a rotary cutter for that. However, I prefer to use a ruler and rotary cutter, especially if the strips are a bit wider.

This is how your "square" should look like by now:

Squares with two sides added

Now that you come this far, it's basically all boring, boring repetition!

Again, place a white 1.25" strip underneath your presser foot, put the "squares" underneath it and sew on one side of the as of yet black sides, cut them loose, repeat on the other side, then press both strips outwards. Your block should now look like this:

First Round Done

Now take a 1" strip in black and sew it on two sides of the block. Press the seams outwards:

Second Round Halfway Done

Now sew the 1" black strip to the other two sides, again press the seams outwards.

Second Round Done

Proceed by taking the 2" white strips and sew them to the block on two opposite sides, cut them off, press the seams outwards.

Third Round Halfway Done

Add the 2" strips on the other sides as well, pressing the seams outwards.

Third Round Done

Can you guess what you'll have to do next??

Right, take the 1.5" black strips and sew them to two opposite sides of the block, press the seams outwards.¨

Fourth Round Halfway Done

Now of course do the same to the other two sides.

Fourth Round Done

For the last time, take a 1.25" white strip and add it to two opposite sides and press the seams outwards.

Fifth Round Halfway Done

Repeat on the other two sides, cut them off and press the seams outwards.

Now you should have six blocks that look like this:

Finished (?!) Block

Now measure your blocks. They should be around 11.5". Mine were a bit smaller, because I use a 1/4" presser foot with guide and as I can't move my needle (yeah, it's a very basic model, I've been saving up for a new one for a while) my seams are a bit fat. However, as long as they are consistent and you're only sewing for yourself, that's not a problem!

In the next tutorial, you'll learn how to turn these blocks into this cushion:

Finished Scales Cushion

All the best,
Cat.

My Second Quilt

 

Somewhere over the .... or Rainbow Strip 'n Flip

Today I'm showing you the second (well, the second one I finished, but the first one I started) quilt I've ever made. It is made with the same jelly rolls I used for my first quilt. I saw Cluck Cluck Sew's easy tutorial on the Strip and Flip top and decided that this was perfect for a first quilt!

And this is how it turned out:

Rainbow Strip 'n Flip Quilt

The Piecing

The piecing should have been quite easy. I mean, it's just strips, right? Yeah, "just" strips...

I ended up with bowed strips. I can't really say in hindsight why that is, just pick one of the following no-nos (which - of course - I all committed):

1. It might well be that the strips I worked with were already cut with an elbow in them.

2. I ironed - a lot, with steam and vigariously!

3. I did sew them in pairs, groups of 4, etc. but always from the same side.

4. My quarter inch seam was non-existent. (To my defense: I didn't have a quarter inch presser foot at the time. I'm also used to the metric system, so it was difficult to just eyeball it. I've gotten better with practice since, so go me!)


For the back I used up the absolutely last scraps I had left over from both this quilt and my First Rainbow quilt. Needless to say, some of those scraps were a bit uneven or too small, but I worked them into a half-decent strip to add some colour to the back.

Rainbow Strip 'n Flip Back



The Quilting

I again quilted with black thread, only realising half-way through that it would be quite noticable on the colourful batiks! Oopsy?
However, I think that was actually a lucky strike: These straight lines actually balanced out the bowing of the strips so that it is hardly noticable in the finished quilt!

Straight line quilting

To change it up a little, I quilted the "flipped" part diagonally and quilted straight lines on all for sides the border so that I ended up with four little checkerboards in the corners.

I tried to machine bind the whole binding, but after sewing down about one third of one side, I decided to rip it all out and do it by hand, because - well, let's just say it wasn't pretty!

Rainbow Strip 'n Flip in all its glory

Overall, I can say that I'm pretty happy how my first lap sized quilt turned out!

All the best,
Cat


Lady Edith's Rectangles

 

When Inspiration Hits

I was surfing the other day and of course I ended up oggling all the pretty fabrics that can be found online. One fabric line that always catches my eye is Andover's Downton Abbey. This time when looking at Lady Edith's line (which I find to be a bit too modern to fit in with the rest, but that's not the point here) I found the Patches Blue fabric:



source: https://www.fabric.com/buy/0314288/downton-abbey-lady-edith-patches-blue

And I suddenly realised that this would make a terrific quilt pattern!

So here is a quick and dirty tutorial:

 

Fabrics Needed

You'll need three different fabrics. One with a beautiful print, two with small ones or solids. I would choose at least one solid fabric, just to let your eyes have a resting point.

 

Cutting and Sewing

Cut 4" strips WOF from the small prints/solids.

Take one strip each and sew them together lengthwise. Then cut 6" pieces crosswise from the strips. If you're lucky, you'll get 7 pieces from one strip set. But just to be on the safe side, calculate with 6 per strip set when buying your fabric.

 

Now take two of the pieces, flip one of them and sew them into a rectangular 4 patch.

 

 

And that is the first finished block! Once you finished them all, measure them (they should be 7.5"x11.5") and square - or rectangle as the case might be - them up. Only then cut the focus fabric to this size as well. This way you can make sure that you won't have to recut your fabric.

 

And now you have the two blocks necessary to complete the quilt top:

 

 

As the focus fabric I chose Kaffe Fassett's Millefiore Blue for this mock-up.

 

 

And here is how the completed top would look like:

 

As you can see, it's a really fast and easy way of making a quilt. You can choose an equal number of rows and columns and it will still end up as a rectangular due to the form of the blocks. Of course you can also vary the size of the strips at the beginning and make the blocks as big or as small as you want!

 

You can make the cutest baby quilts with this pattern (especially if you have to have it done by tomorrow, because of the last minute invite to the baby shower), or display the colours of your favourite sports team.

 

Maybe even finally cut into that wonderful fabric you bought that is far too pretty to cut into, because it is just so beautiful and you don't really want to cut it up into small pieces (Come on, you know The One, it's been in your stash for a while now and you secretly get up in the night, take it out of your closet, pet it lovingly and whisper breathlessly "My precioussssss!").

 

With these big blocks your fabric will be displayed beautifully!

 

 

Let me know if something is unclear to you. I am happy to help!

 

As always, I would love to see your quilt if you decide to use this pattern.

 

Best,

Cat


Update:  Fellow blogger Preeti Harris actually used this design idea to create an adorable baby quilt. How cool is that?! I felt like Christmas in July!

Here is a sneak peak:



Preeti's Pretty Giraffe Baby Quilt

Head on over to her blog to read Lady Edith rides a Giraffe (how's that for a creative blog post name?!). But be prepared to spend some time there, 'cause you'll find some interesting stuff!